JustAnswer
>
Classic Car
Ask A Question
|
Register
|
Login
|
Help
Classic Car
Ask a Classic Car Question, Get an Answer ASAP!
Have your own Classic Car question?
10 Auto Mechanics are Online Now
characters left:
Not a Classic Car Question?
Question
What was the stock from the factory horsepower for a 1971 chevy truck 350? thanks Rick
Submitted: 317 days and 1 hours ago.
Category: Classic Car
Value: $9
Status: AWAITING CUSTOMER ACTION
+
Read More
Posted by
don
317 days and 1 hours ago.
Info Request
Hi rick
my name is don and i will try and help you
depending on the date it was manufactured
it was anywhere from 295 hp top 190 hp
the reason i say that is because of the impossed emmissions applied by the goverment
gm started to reduce the horse power in 1971 by reducing the compression ratios and such
to answer your question at little closer i would need the engine serial number located on the block at the rear left side of the engine behind the head (drivers side )
also you will have to pull one valve cover off and give me the head casting number you will see the raise numbers
plus the intake casting number
is this a 2 or four barrel carb
thanks don
317 days and 1 hours ago.
Reply
It is a 4 barrel carb, but the truck isnt here right now, but it was an early 71 chevy truck 350 4 bbl, also is that a 4 bolt main?, thanks Rick
Answer
Hi rick
when decoding the engine at most web sites
it will state when you run the numbers that it came with either 2 or 4 bolt mains but you will not be able to tell untill you take the oil pan off unless you can find old chev dealer that still has microfiche and you give them your serial number and they can tell you what came in it
if it is an early made nodel like before jan 1 1971 then its a good chance that it is a 290 horse power engine
but when you ge the block casting numbers and head casting numbers you will know for sure
once tou have them you can go to this web site and look up all the casting numbers and it will tell you
http://www.mortec.com/castnum.htm
let me know
don
Expert:
don
Pos. Feedback:
100.0 %
Accepts:
Answered:
1/11/2009
Classic Car Mechanic
30 years of experience and we have 4 classic cars our selfs
+
Read More
Related Classic Car Questions
help i have a 54 chev belair i put new starter coil points
Where can I find emergency brake cables from rear wheels to
i own a 78 el camino with a 5.7L 350cu, i need to know what
GM used to have a chart that told you what size speedometer
what are frame dimensions for 1968 galaxay 500
I want to change the cam in a pinto, any tips or instuctions
like to install differance steering wheel on 57 ford. new wh...