JustAnswer > Chevy
Ask A Question|Register|Login|Help
JustAnswer

Chevrolet

Ask a Chevy Question, Get an Answer ASAP!

Have your own Chevy question?

20 Chevy Mechanics are Online Now
characters left:
Not a Chevy Question?

Related Cheverolet Topics:

  • Box
  • ,
  • Cab
  • ,
  • Key
  • ,
  • Run
  • ,
  • Set
  • ,
  • Come
  • ,
  • Fuse
  • ,
  • Hook
  • ,
  • Hood
  • ,
  • Part
Bookmark and Share

Question

I have a '07 2500HD. With key in ignition, light come on, radio works, etc. When I go to start, nothing happens. It doesn't turn over, no clicking, nothing.....Any suggestions???

Submitted: 322 days and 23 hours ago.
Category: Chevy
Value: $15
Status: CLOSED
+
Read More
Posted by toolpusher08 322 days and 23 hours ago.

Answer

Hello XXXXXX,

You might have only a blown fuse so be sure to check all the fuses ubder the hood and in the cab.if it's not fuses,It sounds like your security system has triggered. One way to reset it is to hook a battery charger to your battery, get in the truck turn the key on let the key set in the on position for 11 minutes.Turn the key off for 30 secounds and repeat this procedure 4 times. The last egnition on ,leave it on the full 30 secounds than try to start the truck.If non of this works the only other option you have is to take it to the dealer and let them run a diasgnosis on it.

322 days and 23 hours ago.

Reply

There are no blown fuses anywhere unless there are fuses other than the ones inside the cab and in the black box in the engine compartment.

I'm not sure I fully understand the reseting of the security system. With battery charger in place, turn key in on position for 11 minutes, then off for 30 seconds. Repeat procedure 4 times. Then do what?

Accepted Answer

There are no other fuses,and the battery charger is to keep the battery up while your going through the resetting procedure.Ok lets do it like this.

turn key on for 11 minutes- in the on position,turn key to off position for 30 secounds.

turn the key to on position for 11 more minutes, then off for 30 secounds do this a total of 3 times on the-- 4th time you will turn the key off for 30 seconds then on for 30 seconds and crank it do not turn it off.It should run.If that doesn't do it it could be the electrical part of the ignition switch, Which you can replace your self, and go through this same procedure with out taking it to the dealer.Sorry I didn't explain this better at first.

Expert: toolpusher08
Pos. Feedback: 100.0 %
Accepts: 
Answered: 1/5/2009

Chevy Technician

ASE certified,expired. 30 years experiance self employed semi-retired.

+
Read More

Related Chevy Questions

  • Im having eratic trouble with a 97 camaro 5.7 v8 ...
  • I have a car that i ...
  • ac not blowing cold air and was a month ago . and is charged
  • why would engine idle rough and backfire???
  • My wife just called and is broke down . We have a 2003 ...
  • based on my details, is this an easy fix?
  • i have a 94 lumina with 3.1 ac compressor will not kick ...
  • My coolant light is on and i put fluid in there.



Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
Question List | Become an Expert | Terms of Service | Security & Privacy | About Us
© 2003-2009 JustAnswer Corp.