Hi
Could you let us have the make and model
Alex
It is a Worcester 240 Boiler sysytem.
Fiona
Hi Fiona
Do you have a room thermostat?
Is the timer/programmer built in to the boiler or seperate ( on the wall) ?
Hi Alex
No I don't have a room thermostat it is all built in to the boiler. Everything seems to be fine apart from the demand light not lighting up and not having any hot water/heating.
Okay you should have a Worcester 240 combi RSF ?
Pressure gauge on the front . What is it reading?
Run the hot tap does it fire?
Alex.
Yes it is the combi rsf
The pressure gauge is on just above 0 but no it does not fire when i run the hot tap.
Ok the pressure sensor has locked the boiler out and you need to re pressure the system to about 1.5 on the gauge.
On this model you either have an integral filling point and you should have a white plastic key or sometimes the installer may have opted for a filling loop below the boiler which looks like this
I don't appear to have a white key but then again I can't see a loop below the boiler either.
If you look on the under side of the boiler there is a white cover (plastic) this just pulls away . on this cover there is a place for the key to be stored. I have yet to actually find one there though but worth a try.
I need to go out a breakdown , but should be back on line in about an hour and I am sure we can sort this one out
Are you in the uk?
This boiler is one that the front comes off but nothing at the bottom seems to slide out - have checked on the shelf in the boiler but nothing there, suprise suprise.
Yes I am in the UK, down in Wiltshire.
Sorry for the delay . I'm on call today.
I,m in Stroud, little bit too far to sort it out
.
Have a quick look at this link
http://www.ultimatehandyman.co.uk/TOPPING_UP_A_COMBI_BOILER.htm
Thats what you need to do.
Let me know how you get on
Another useful link is http://www.safecert.co.uk/ follow the contact details and ring the number,
HVAC Technician
10 years UK based boiler repair and servicing. Registered gas operative in Uk
Thanks for this - turns out I need a new gas valve.
Thanks for your help though.