Hi, I can help. The 41 , or p0141 is a problem with the secondary o2 sensor heater circuit.
The primary sensor in right in the exhaust manifold originally and the secondary is screwed into the cat.
If you dont have a secondary sensor installed thats the problem.
It also monitors the catalytic convertor operation so it will eventually set a p0420 code too.
The secondary is screwed into the cat, visible from the outside of the cat?
where can i find the secondary o2 heater circuit?
Yes its visible in the cat. from the outside.
The sensors have a heater buit in and they burn out all the time.
Its usually not anything else.
Honda Technician
Dealership tech since 1982. ase and Honda Master tech
It just needs to be screwed in and plug in the wire connector.
Retail on a new Honda sensor is 264 and change