Hi, I can help. The 41 , or p0141 is a problem with the secondary o2 sensor heater circuit.
The primary sensor in right in the exhaust manifold originally and the secondary is screwed into the cat.
If you dont have a secondary sensor installed thats the problem.
It also monitors the catalytic convertor operation so it will eventually set a p0420 code too.
The secondary is screwed into the cat, visible from the outside of the cat?
where can i find the secondary o2 heater circuit?
Yes its visible in the cat. from the outside.
The sensors have a heater buit in and they burn out all the time.
Its usually not anything else.
H&onda Technician
Dealership tech since 1982. ase and Honda Master tech
It just needs to be screwed in and plug in the wire connector.
Retail on a new Honda sensor is 264 and change