Accepted Answer

Hi XXXXXXXXX, Firstly you will need to ISOLATE your APPLIANCE from the ELECTRICAL SUPPLY. Remove lid and switch cover,sometimes panel has to be removed to do this.The panel is held along the front by plastic lugs that have to be gently manouvered to avoid breaking.Some panels have some self tapper screws to aid fixing the panel in place. Once you have removed the switch cover(The part you press with your finger) you can then see how the switch is held in place.It is again often just plastic lugs that snap into the panel and sometimes they are a bank of three or four switches ,which means you have to change the row of them.Rows of switches that are joined like this often have a retaining screw at each end. They are not to expensive even for the row .(About £20) Good Luck Forry.

Expert:	Forry
Pos. Feedback:	97.7 %
Accepts:	184
Answered:	11/19/2008

Home Appliance Technician

I have my own business repairing Washing Machines etc etc.