Preliminary Procedure

1. Remove the front seat adjuster covers.
2. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front.

1

Front Seat Assembly Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
45 N·m (33 lb ft)

2

Front Seat Assembly Nut (Qty: 2)

Tighten
45 N·m (33 lb ft)

3

Front Seat Assembly

Procedure

Disconnect the electrical connector.

1

Front Floor Console Bezel Assembly

Tip

1. Use a flat-bladed plastic trim tool to release the retainer clips along the rear edge of the bezel.
2. Lift the bezel out of the console assembly.

2

Retainer Clips (Qty: 4)

Preliminary Procedures

1. Remove the 2 front seats. Refer to Front Seat Replacement - Bucket .
2. Remove the right and left front floor console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right Side and Front Floor Console Side Trim Panel Replacement - Left Side .
3. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement .
4. Disconnect the electrical connectors to the console assembly.

1

Front Floor Console Assembly

Tip

1. With the aid of an assistant, remove the console from the vehicle.
2. When replacing the console assembly, transfer all the necessary components.

1

Console Side Trim Panel

2

Retainer Clips (Qty: 2)

1

Console Side Trim Panel

2

Retainer Clips (Qty: 2)

1

Front Floor Console Screw (Qty: 8)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Front Floor Console Assembly

Refer to Front Floor Console Replacement .

3

Front Floor Console Bracket Screw (Qty: 4)

Tighten
9 N·m (80 lb in)

4

Front Floor Console Bracket

5

Amplifier Screw (Qty: 3)

Tighten
9 N·m (80 lb in)

6

Radio Speaker Amplifier Assembly

Tip