With the key on, remove the cover on your firewall on the passenger side, you will find a black fuse holder to the left, remove the fuse from the cover, leaving the fuse plugged into the wires, this is the lift pump fuse. Crack open the bleeder, and touch the tip of the fuse to the electrical stud mounted right next to the fuse. This is a power stud, it will power up your pump,and it should run, and pump out of the bleeder with some pressure.Thanks...Gary
ASE Certified Technician
ASE Master Truck Technician,20 Years GM Shop Foreman,Fully Trained GM Trucks Light and Heavy.