Hi my name is John.
Images available only to Customers.
Calibration test may be initiated manually by pressing and holding WASH and REAR WIPER buttons for 5 seconds
before doing the first test.
Set Blower motor ON HIGH Open all A/C outlets When the first two light stop flashing(they will cycle back and forth for couple of mimutes.
Than you do the cool down test.
You have to have a 20 degree drop for the second test.
Depress A/C and WASH buttons simultaneously for 5 Seconds (Until all LED's light)
Some time you have to run the test several time to have all the light stop flashing.
Let me know how you did.
Please push the accept button when were done.
Thank you for choosing just answer.