JustAnswer
>
Ford
Ask A Question
|
Register
|
Login
|
Help
Ford
Ask a Ford Question, Get an Answer ASAP!
Have your own Ford question?
6 Ford Mechanics are Online Now
characters left:
Not a Ford Question?
Related Ford Topics:
Car
,
Lube
,
Cable
,
Right
,
Shift
,
Trans
,
Inside
,
Linkage
,
Mustang
,
Problem
Question
My 2000 Mustang GT has become very difficult to shift, it is an auto trans. The linkages have been lubed both inside and under the car. Any suggestions
Submitted: 580 days and 12 hours ago.
Category: Ford
Value: $9
Status: CLOSED
+
Read More
Posted by
Steve
580 days and 11 hours ago.
Info Request
..HELLO!
You say that the linkages have been lubed in and out. How did you lube the inside linkage? RSVP
Steve
580 days and 11 hours ago.
Reply
I lubed inside the car but that wasn't the problem. I lubed under the car by adjacent to the transmission shift mechanism which was dry and that didn't help. I lubed above where the cable comes out of the inside of the tranny tunnel and that didn't help. The cable seems to be designed to be sealed and can not be lubed, does that need replacement?
Accepted Answer
..HELLO!
You're right about the cable being sealed. Replace the cable.
Steve
Expert:
Steve
Pos. Feedback:
100.0 %
Accepts:
Answered:
4/21/2008
Sr. Tech
20 years as a FORD dealership tech
+
Read More
Related Ford Questions
what would cause the anti freeze to be foammy when its flush...
I'm working on an '02 F-350 Super Duty, 7.3 turbo diesel, cr...
just replaced the air suspension compressor , now i have no
My engine warning light doesn't go out when the engine is st...
I have just changed the ignition lock barrel on my 1997 tran...
my interior lights stay on. is that the door switch and wher...
is their a system that will allow you to buypass the convert...
i have a 6.4 diesel powered f350the check engine comes on wh...