Heat is the number one enemy of electronics and these sets operate hot. Since these sets are assembled using the wave soldering process they are known for having cold solder connections. This model of TV has over 3,000 parts which includes millions of transistors inside the integrated circuits. Over time the capacitors will change value, leak and become defective. Resistors will change value and burn. This will cause other components to become defective. This can have a domino effect and cause other parts to fail. Replacing one defective part may make the TV operate for a short time but the part will fail again since if the parts that caused the failure to begin with are not replaced. For a proper repair all the electronics must be diagnosed by someone with the correct electronic test equipment and the skills to use the test equipment. It is very likely that a capacitors is going bad or a cold solder connection is making connection once the TV warms up. The problem is like;y to be in the vertical section if the picture is flipping horizontally. Most repair projection TV sets will cost in the range of $250 or more to have repaired. This can vary depending on what is found to be defective.
Should you require further clarification, never hesitate to ask. It would be my pleasure to clarify my answer to your question. If after reviewing the above information, you have additional questions, I will be glad to answer them. My goal is your 100% satisfaction with all questions I answer.
Please click the green ACCEPT icon if you feel I have given a complete answer, and you are satisfied with my answer. Positive feedback and bonuses are always greatly appreciated!
Regards,
Edward
As always when using Just Answer your accept is required for me to be paid.
Please do not accept unless you are 100% satisfied with the answer.
If you accept my answer please leave positive feedback.
If you do not feel you can leave positive feedback please do not accept the answer.
Edited by Edward on March 25 2008 at 5:57 PM
Please click "ACCEPT" if I answered your question to your satisfaction. If you need additional information, ask before accepting this answer. I will be glad to answer any and all questions you may have on this subject.