JustAnswer
>
BMW
Ask A Question
|
Register
|
Login
|
Help
BMW
Ask a BMW Question, Get an Answer ASAP!
Have your own
BMW
question?
6 BMW Mechanics are Online Now
Type your bmw question here...
characters left:
Not a BMW Question?
Related BMW Topics:
Car
,
Hub
,
May
,
Top
,
Two
,
525i
,
Back
,
Come
,
Jack
,
Kick
Question
trying to change tire on my 525i got bolts out but wheel will not come off
Submitted: 735 days and 15 hours ago.
Category: BMW
Value: $9
Status: CLOSED
+
Read More
Optional Information
Optional Information:
2003 BMW 525i 2.5
Already Tried:
took bolts out
Accepted Answer
You wheels are hub-centric, which means the wheel centers itself on the wheel hub. When just a slight amount of water gets on the hub, and the wheel has not been taken off in a long time the hub and/or rotor rust slightly causing the wheel to stick. If you kick, or hit the top and the bottom of the tire, going back and forth eventually you can wiggle the wheel loose. This may take some force, make sure you do not bump your car off of your jack. When you put the wheel back on try to use a wire brush on the hub of the car so that you can install the wheel properly. I would torque all of the bolts two times to ensure that you have the wheel on the hub all the way.
If you found my information helpful please click accept. If you need more help regarding this issue do not hesitate to respond. Good feedback also helps me out.
Expert:
Howie
Pos. Feedback:
100.0 %
Accepts:
123
Answered:
3/16/2008
BMW Mechanic
Currently a lead BMW technician. BMW technician since 2001.
+
Read More
Related BMW Questions
What special tool do I need to properly remove the tie rod
My M6 has been sitting for a month in the cold and now wont
Oil in left bank spark plug holes.
Hi I have a 1986 735i and I have a problem with the transmi...
i have a problem with my 318 convertible bmw.the roof is not
2001 530i ac system capacities and pressures hi and low
blower well not shut off were is the fuse!
how much does it cost to repair the camshaft and the rocker