JustAnswer
>
Chevy
Ask A Question
|
Register
|
Login
|
Help
Chevrolet
Ask a Chevy Question, Get an Answer ASAP!
Have your own Chevy question?
4 Chevy Mechanics are Online Now
characters left:
Not a Chevy Question?
Related Cheverolet Topics:
Gmc
,
Low
,
Two
,
Arms
,
Free
,
Gear
,
Hood
,
Move
,
Part
,
Slow
Question
Hello, I have a 1991 GMC truck. The wipers work intermittenly even though the wiper motor continues to hum. If I raise the hood and smack the circut board housing it does engage itself for awhile at least. Both arms remain in sink at all times and do not appear to be loose. Am I correct in assuming that this is a mechanical issue rather than an electrical one?
Submitted: 631 days and 15 hours ago.
Category: Chevy
Value: $15
Status: CLOSED
+
Read More
Posted by
Carhelp4u
631 days and 15 hours ago.
Info Request
Does this happen in the high speed or low speed setting?
Edited by carhelp4uhere on 3/1/2008 at 5:16 PM
631 days and 14 hours ago.
Reply
It happens at fast,slow or intermitten settings. At times they wont engage when first turned on and sometimes they do. Sometimes the stop in a middle of a revolution, yet the motor continues to hum. The wipers seem stationary when this happens(hard to move)but popping the hood and smacking the housing re-engages it. It used to last a couple hours this way and just got used to it but the situation has become progressively worse as in more frequent and last about ten minutes tops. The nylon gear looks to be in good shape, the spiral gear looks good but has a strange taper topards the end.
Accepted Answer
From what you are telling me, this sounds to me like more of an internal motor problem. Tapping on the case is enough to jar the internals to get the brushes to a good spot in the armature. This is normally a telltale sign of an electric motor failure. Honestly though I would disconnect the windsheild wiper regulator and verify that it is no binding or anyhting of that nature. In all though I think a remanufactured wiper motor will cure this problem. If you decide to do that, make sure that you get the one with pulse. I have seen many part stores sell the incorrect two speed model and that causes for some real strange occurences. Feel free to contact me wiht any questions, problems, or if you would simply prefer a second opinion. Good luck!
Expert:
Carhelp4u
Pos. Feedback:
99.8 %
Accepts:
Answered:
3/1/2008
ASE CERTIFIED TECH
ASE CERTIFICATION
+
Read More
Related Chevy Questions
I am installing a XM radio in a 2005 Trailblazer. I need .....
Hello, I have a 97 s-10 4x4 kingcab , my low beams ...
2000 GMC 3500 5.7 litre loss of power intermitent ?
I have a 2005 cobalt. If you let the cer sit for 2 days the ...
ok, this is the deal. I have a 92 Buick Park Avenue, my ...
We just had the front brake pads of our 1999 GMC ...
how do I remove the dasboard on a 2000 buic lesabre
87 suburban turned on headlites and truck died, ...