Hello XXXXXXXXXX,
Please go out to your truck and cut the "flashers" on. Walk around your truck and look to see which "turn" signals are not working and get back to me. Thanks. Dave.
It's the lever you use. You would need to remove the steering column shroud, there are 3 phillips screws that go in from the bottom. If part of the plastic goes all the way around the key cylinder, you will need to remove that, with key in on position there is another hole in the bottom cover, using a pick or pocket screwdriver, you push up to release the lock cylinder while pulling it out.
Senior Master Ford Tech
26 years exp with Ford Products, ASE Master Auto & Truck + advanced engine perf L1/L2 Gas & Diesel
Should really test the ouput of switch before buying one.