BMW

Ask a BMW Question, Get an Answer ASAP!

Have your own BMW question?

4 BMW Mechanics are Online Now

characters left:

Not a BMW Question?

671 days and 20 hours ago.

Reply

Hi im having problems with my 96 328i front windows the fuse keep blowing every time i replace it.what could it be? thanks

Edited by XXXXXXXXXX on 1/21/2008 at 3:20 PM

Optional Information:
1996 BMW

Already Tried:
replacing the fuse

Posted by RIP 670 days and 21 hours ago.

Info Request

Hi, welcome to Just Answer.
Does the fuse blow immediatly? Or after you press the window switch?
Rip

668 days and 21 hours ago.

Reply

after i press the window switch

Posted by RIP 668 days and 19 hours ago.

Info Request

Hi, welcome to Just Answer.
Is this the 30 amp F14 fuse in the front power box?
Rip

665 days and 18 hours ago.

Reply

Reply to RIP's Post: yes its the 30amp fuse. when ever i replace the fuse and press the window the fuse blow. at first it was the driver window not working now both are down due to fuse

Accepted Answer

Thanks, What you need to do is remove the door trim panel and disconnect the driver side power window motor. It may be shorted which is why the fuse blows when you press the switch. If after disconnecting the motor the fuse no longer blows, replace the motor. If it continues to blow, let me know and we take it from there.
Rip

Accepts:
Expert:	RIP
Pos. Feedback:	96.6 %
Answered:	1/27/2008

Lead Technician

BMW Factory Training, ASE Master Techinician, Advanced engine performance.

664 days and 21 hours ago.

Reply

what type of tool do i use to take the driver door panel off. thanks

Posted by RIP 664 days and 20 hours ago.

Answer

You need to use trim tools like the ones sold below on ebay...
http://cgi.ebay.com/ebaymotors/NEW-5PC-NO-SCRATCH-AUTO-BODY-TRIM-DOOR-PANEL-TOOLS_W0QQitemZ230216152707QQcmdZViewItem?hash=item230216152707
Below is the procedure to remove the trim panel...
Service and Repair
Notes
WARNING: For models with airbags, follow safety instructions.
If work is carried out in the area of airbag systems, e.g. on:
Door trim panels
Interior trims
Instrument panel ect. the ignition must be turned off in each case.
The ignition must always be off.
The ignition key must be removed from the ignition lock. This eliminates the risk of injury
CAUTION: DO NOT use any sharp-edged tools to remove the panel (risk of damage to side airbag)

View Full Image

Lift off cover, remove screw and window winder. [IF EQUIPPED]

View Full Image

Unscrew catch button (1).
Remove plate (2).
Lever out switch (3) and disconnect plug.

View Full Image

Lever out finishers and release screws underneath.

View Full Image

Unclip door trim panel all around.
If necessary, disconnect plug on loudspeaker.
If necessary, replace damaged clips.

View Full Image

Installation Note:
If the clips (1) on the door do not stay in the recesses (2) of the door trim (pulled apart or torn), use repair clips.
Cut cover around repair clip and attach door trim.
Convertible and Coupe:
Attach repair clip (3) as illustrated in diagram.
Sedan and Touring:
Twist repair clips (3) through 180°and attach.
Installation Note:
After fitting the door trim, proceed as follows:
Open door window.
Lock with vehicle key.
Check for ease-of-movement on retaining button linkage.
If necessary, align linkages.

664 days and 20 hours ago.

Reply

this information is really good, after i buy the trim tools what type screw driver do i need i tried to used a standard philp screw driver but the screws are different

Posted by RIP 664 days and 20 hours ago.

Answer

Ooops, I forgot to tell you the screws are Torx...you can pick up inexpensive Torx driver sets for around $10 at moxt any hardware store or Sears...they come with different sizes on screwdriver type handles. Take your time with the door trim panel...after you do it once or twice it only takes 5 minutes to get it off...and BMW trims panels are good experience for all other types of panel removals.
Rip

664 days and 20 hours ago.

Reply

thanks alot u guys have been very help

Posted by RIP 664 days and 20 hours ago.

Question

Thanks for the ACCEPT, i'll still be here if you run into any trouble.

664 days ago.

Reply

how should i replace the window motor it apears to be secured on the regulator

Posted by RIP 663 days and 21 hours ago.

Answer

Below is the motor seperation:
Removing and Installing/Replacing Flat Motor For Front Left or Right Electric Window Lift
Notes
Removing and installing/replacing flat motor for front left or right electric window lift

Necessary preliminary tasks:
Remove electric window left in front door.
Important!
When replacing the window lift, you must also replace the corresponding sleeve (1 or 2) depending on the flat motor version.

View Full Image

Loosen screws (1).
Detach flat motor (3) from window lift (2).

Installation:
Fit sleeve (4 or 5) between flat motor and window lift (risk of damage).
Check sleeve (4 or 5), depending on flat motor version, for damage; replace if necessary.
Tightening torque, 51 33 1AZ.
Check function.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

BMW

Have your own BMW question?

Reply

Hi im having problems with my 96 328i front windows the fuse keep blowing every time i replace it.what could it be? thanksEdited by XXXXXXXXXX on 1/21/2008 at 3:20 PM

Optional Information

Optional Information: 1996 BMWAlready Tried: replacing the fuse

Info Request

Hi, welcome to Just Answer.Does the fuse blow immediatly? Or after you press the window switch?Rip

Reply

after i press the window switch

Info Request

Hi, welcome to Just Answer. Is this the 30 amp F14 fuse in the front power box?Rip

Reply

Reply to RIP's Post: yes its the 30amp fuse. when ever i replace the fuse and press the window the fuse blow. at first it was the driver window not working now both are down due to fuse

Accepted Answer

Reply

what type of tool do i use to take the driver door panel off. thanks

Answer

Reply

this information is really good, after i buy the trim tools what type screw driver do i need i tried to used a standard philp screw driver but the screws are different

Answer

Reply

thanks alot u guys have been very help

Question

Thanks for the ACCEPT, i'll still be here if you run into any trouble.

Reply

how should i replace the window motor it apears to be secured on the regulator

Answer

Related BMW Questions

Hi im having problems with my 96 328i front windows the fuse keep blowing every time i replace it.what could it be? thanks

Edited by XXXXXXXXXX on 1/21/2008 at 3:20 PM

Optional Information:
1996 BMW

Already Tried:
replacing the fuse

Hi, welcome to Just Answer.
Does the fuse blow immediatly? Or after you press the window switch?
Rip

Hi, welcome to Just Answer.
Is this the 30 amp F14 fuse in the front power box?
Rip