My name is Randy,
I will be glad to assist you with this.
>>>PLEASE CLICK HERE TO ORDER THE ADAPTER<<<
SET UP INSTRUCTIONS>
Step one: Unpack the Bluetooth 2.0 Wireless Adapter
Remove the Bluetooth 2.0 Wireless Adapter from the box.
Remove the packaging material around the adapter.
Step two: Check the contents of the box
The contents might vary by country/region. See the packaging for a list of items shipped in the box.
Step three: Install the Bluetooth 2.0 Wireless Adapter
Locate the host USB port on your printer or all-in-one.
It will usually be located in the front and is shaped like the USB port on your computer. It may be called a camera or Pictbridge port on your printer.
Figure : Locating the USB port on the printer
Remove the cap from the HP Bluetooth Adapter and insert it into the port.
Figure : Inserting the Bluetooth Adapter into the printer port.
Step four: Print from the Bluetooth device
You can print from different Bluetooth devices such as computers, PDAs, cameras, and camera phones. Follow these steps to print from the Bluetooth device:
From your sending device, start the Discovery of available Bluetooth printers.
Select the printer and enter the Passkey if prompted.
Please reply and let me know if you need any other assistance,
Also, please take a moment to rate my service by choosing one of the stars at the top then click submit.