Hi, I'm Nathan.Sorry to hear that you're having trouble with this but I'll do my best to help you.
There are a few possible causes of this issue, including a bad cartridge, internal debris/contamination, or a hardware failure (bad printhead, bad logic board, faulty sensor, etc).
What we can try are some cleaning and reset steps.
First remove all of the ink cartridges, then clean the metal electrical contacts on the back, as well as where they mate up inside the printer, using qtips and rubbing alcohol. Dry well, then reseat the cartridges.Then reset the machine:unplug power at the wall outletwait 5 minutespress and hold the power/on button for 60+ secondskeep holding while plugging back in, and for another 60 seconds after, then release
Let me know the results, and I'll advise further if needed.
Hello, it appears your question is still open.
Do you need more help with this?If so, just reply back on this page. If I’ve answered your question, please let me know you are satisfied, to conclude our session.
Please note: You have already paid your fee to the site; I'd like to help you and provide value for that fee, but I do need to communicate with you here to do so.