How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask crash2199 Your Own Question

crash2199, Technician
Category: Printers
Satisfied Customers: 15628
Experience:  5+ years as Tech
Type Your Printers Question Here...
crash2199 is online now
A new question is answered every 9 seconds

I have a Pro 18 iscan and I have pulled the ribbon out on

Customer Question

I have a Pro 18 iscan and I have pulled the ribbon out on the board. Can it be repaired?
JA: What's the make/model of your device? How old is it?
JA: How long has this been going on? What troubleshooting have you tried?
Customer: can't ge the ribbon back and it is damaged. Happen about 3 years ago and I have not used the scanner after it happen.
JA: Anything else you want the electronics expert to know before I connect you?
Customer: can it be repaired and where do I send it?
Submitted: 22 days ago.
Category: Printers
Expert:  crash2199 replied 22 days ago.


It can be repaired but the cost of the repair plus labor could be hundreds of dollars. What is your zip code so I can look up local places?

Customer: replied 22 days ago.
Customer: replied 22 days ago.
Are you going to tell me where I can get it repaired???? Or just charge me $24?
Expert:  crash2199 replied 22 days ago.

I apologize -- I just received the message.

You can call:

RBG TV & Electronic SVC


Ramer, TN 38367

(###) ###-####/p>

If you can take a minute and use the rating system to rate our session as 3 stars or higher and press Submit so I am credited with helping you.