Hi, I'm Nathan.Sorry to hear that you're having trouble with this but I'll do my best to help you.
Unfortunately this B200 error indicates a hardware problem,
specifically, it is the result of a bad printhead (or the logic board that controls it).
The head is a "wear item" that fails with age/use. As this is a 2010 model printer, it is well past its 3 year service life, so this type of failure is not surprising.
There is one step you can take here, to clean and reset the system, but it is very unlikely to help. 99.9% of the time, this does come down to a hardware fault.
While it can be fixed, it is not worthwhile to do so. You would have to, at a minimum, replace the printhead, which costs about $85; if the logic board is bad you’re looking at $200-250. For $80-100 you can replace the entire machine with a brand new model, with current technology and a fresh warranty, which makes more sense than buying the new part for an older printer.
Depending how you'd like to proceed, I can advise on the cleaning/reset steps if you wish to try, help with finding parts, finding a local repair shop, or recommending replacement options for you. Just let me know.
Best regards, ***** ***** for the news,
I would not recommend trying to fix either, it just isn't practical.
If looking for a replacement, I’d recommend any of the Epson workforce series printers. They tend to be very reliable, are easy to set up and use, have good print quality, and reasonably priced ink. Example: http://amzn.to/29wF4OP or http://amzn.to/1NYUF1P
Note that these, like all consumer grade inkjet printers, are designed to be low cost and are essentially disposable after a few years, subsidized by the high cost of ink cartridges. If you wish to have a better quality and longer lasting printer, that comes with years worth of ink up front, consider the Epson ecotank models instead: http://amzn.to/1PpOj0C
Alternately, for a more business/commercial grade product that will be rated for a 5 year life, consider a laser printer. Lasers cost more up front also, but a toner cartridge can last for thousands of pages. A black only all in one laser is around $125: http://amzn.to/1JSHOlQ
while a color model is about twice that: http://amzn.to/1n4I7Q5
If you have any other questions, just let me know. Otherwise, please take a moment to rate my service using the stars at the top of the page; hopefully I have earned 5 Stars. I also invite you to contact me directly with any future support needs at http://bit.ly/1QwLxGh and ask for Nathan.
Thank you, ***** ***** a nice day,
Do you need more help with this? The site shows that your question is still open (until rated and closed). I did send you a detailed description of the problem as well as replacement recommendations, but if you need more information I'm happy to advise further.
Please note: You have already paid your fee to the site; I'd like to help you and provide value for that fee, but I do need to communicate with you here to do so.