How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Electronics Pete Your Own Question

Electronics Pete
Electronics Pete, Engineer
Category: Printers
Satisfied Customers: 15773
Experience:  HNC Computing; Large format and multifunction printer expert
30970729
Type Your Printers Question Here...
Electronics Pete is online now
A new question is answered every 9 seconds

The feed dogs won't return to the up/ sew position after

Customer Question

The feed dogs won't return to the up/ sew position after dropping them to sew a button
Submitted: 3 months ago.
Category: Printers
Expert:  Electronics Pete replied 3 months ago.

Hi Stephanie,

My name is***** will try my best to help you with your question.

You will need to remove the feed dog plate again and look for a buildup of lint and make sure it is really clean in there.

After cleaning, you should also apply oil to the feed dog area.

Let me know if that helps?

--------------------
Kindly rate my service 5 stars at the top of your question page so I am rewarded for my time; tips appreciated :)
You can always reply back at any time if you need further assistance.
Pete.
--------------------

Expert:  Electronics Pete replied 3 months ago.

Hi, just checking in on your question, do you need any further assistance?

Expert:  Electronics Pete replied 3 months ago.

Hi, just checking in on your question, do you need any further assistance?