How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Sudipto Your Own Question

Sudipto
Sudipto, Engineer
Category: Printers
Satisfied Customers: 5321
Experience:  DIploma in Computer Hardware
15197395
Type Your Printers Question Here...
Sudipto is online now
A new question is answered every 9 seconds

Reset a Canon Pixma MP495 Wireless print to Factory

Customer Question

Reset a Canon Pixma MP495 Wireless print to Factory Settings?
Submitted: 8 months ago.
Category: Printers
Expert:  Sudipto replied 8 months ago.

If you need to reset your network settings back to factory default, for example if you change your access point, you can do so by following these instructions.

Please note that initialisation erases all network settings on the machine, so printing or scanning from a computer over the network will become impossible until the printer is re-configured with new network settings.

You can get the steps from the link below. Please let me know, if you need any further help otherwise please remember to give positive rating, as that is the only way I am compensated for my time and effort.

http://www.canon.co.uk/support/consumer_products/pixma_printer_wireless_connection_setup/mp495_printer_wireless_connection_setup/#tab-content3