How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Robert M. Your Own Question

Robert M.
Robert M., Consultant
Category: Printers
Satisfied Customers: 8753
Experience:  30+ yrs. experience in NYC computer industry working with PC and networks, banks, brokerage, legal etc.
23372949
Type Your Printers Question Here...
Robert M. is online now
A new question is answered every 9 seconds

MX922

Customer Question

MX922
Submitted: 12 months ago.
Category: Printers
Expert:  Robert M. replied 12 months ago.

You just have to get it out. You can remove the ink cartridges to make it easier. You can usually remove the print head itself after you remove the cartridges by unlocking one level on the side or top and pulling it up and out. But the support for it will still be there and the paper is probably under that. Still it may give you enough room to poke it out with a thin screw driver

Customer: replied 12 months ago.
I was not able to remove the cartridge holder to get to remove the paper. this was a label paper and most lack ally one of the labels is under the head. I wll have to take it to a shop to have it removed. thanks
Expert:  Robert M. replied 12 months ago.

This page shows how to remove the print head but it may not do you much good

https://support.usa.canon.com/kb/index?page=content&id=ART143853

This is probably the best document on how to remove it but it mostly just says slide the print head out of the way. It's tougher if the labels are stuck to it

http://ugp01.c-ij.com/ij/webmanual/ErrorCode/MX920%20series/EN/ERR/ERR_Other0100.html#wp1239003