How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Freddy M. Your Own Question

Freddy M.
Freddy M., Technician
Category: Printers
Satisfied Customers: 18398
Experience:  Years of IT and customer support experience
15852642
Type Your Printers Question Here...
Freddy M. is online now
A new question is answered every 9 seconds

I own a Canon Printer MP970 All of a sudden, I am able to

Customer Question

I own a Canon Printer MP970
All of a sudden, I am able to print and Message given says:
The type of print head is incorrect.
Install the correct print head.
I only touch my printer to change ink cartridges.
I don't even know where the print head is located.
Please help
Frances
Submitted: 1 year ago.
Category: Printers
Expert:  Freddy M. replied 1 year ago.

Hello my name is***** do not rate until we are finished. I look forward to assisting and am very sorry to hear that you are having this problem. I want to warn you that it is possible you will need to replace a part in order to fix this. There are a few different things that can cause this and a couple different parts so we would need to troubleshoot to find out for sure. Have you tried cleaning it yet?

Customer: replied 1 year ago.
OK
I'll try cleaning and get back to you
When It's done later today
Thanks
Frances
Expert:  Freddy M. replied 1 year ago.

Ok but do not use the software cleaning instead let's try doing a manual cleaning of the machine and see if that helps at all.
If you have any trouble or get stuck at any point please let me know so I can help you.

Remove all the ink cartridges from the machine.
Then clean the contacts on the cartridges as well as inside the machine itself.
Do this with a small amount of warm water on a cotton swab until no ink comes off on the swab.
If any of the other cartridges are low, empty, leaking or bulging replace them.

Now once you have done all of that turn off the machine and unplug it for 70 seconds
Plug it back it and wait for the insert cartridges message
Insert the cartridges and check to see if the problem is still there.

If this did not work please come back and let me know by clicking on reply to expert so we can continue.
If it did work please don’t forget to leave a positive rating it is greatly appreciated.