How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Michael Hannigan Your Own Question

Michael Hannigan
Michael Hannigan, Technician
Category: Printers
Satisfied Customers: 11190
Experience:  25+ Years Experience Computers, Electronics, and Printers - HP, Canon, Xerox, Ricoh, Lexmark, Oki, Ghestner, Konica Minolta, Kyocera, Sharp
23511658
Type Your Printers Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

How do I replace the canon imagerunner c3220 FM3-3775-000

Customer Question

How do I replace the canon imagerunner c3220 FM3-3775-000 swing plate assembly?
Submitted: 1 year ago.
Category: Printers
Expert:  Michael Hannigan replied 1 year ago.

Hello. My name is***** can help you with your question. First you'll have to slide the manual feeder Assembly out.

To remove it, put your hand where you have slid out the manual feed unit; then, while holding down the swing plate found to the rear of the drum drive unit, remove from the machine’s rear side plate.

Expert:  Michael Hannigan replied 1 year ago.

If you have the service manual you'll see pictures on around page 385.

Related Printers Questions