PIXMA MX850allin one SERIAL # XXXXX 8/12/08Printer gives me error message B200 lights blink only on Alarm and Feed SwitchI have been printing from rear, but no front or rear light signal from Feed Switchany suggestion of what may be wrong?Edward Holsen XXX@XXXXXX.XXXXXX-XXX-XXXX
Optional Information: Make: CANON Model: PIXMA MX850 allinone Already Tried: checked power cord turn on and off per Instruction Book Do not find error # XXXX listed in Book Only 2 panel lights blink COPY and ALARM SERIEL #ABBE33357 (8/12/08) XXXXX@XXXXXX.XXX XXX-XXX-XXXX
The B200 error is basically not a good sign withe the printer head this means ther printhead temperature has exceeded due to which the electronic part in the head is either burnt or overheated.
The can happen due to the printhead ink wells ran out of ink and printing has continued. When the printer prints without ink in the tube or the wells which causes overheating the printnozzels which leads to burn them and the casue is print head dead.
If Your printer is under warratny then you can get a new printer in replacement or else you need a new print head to fix the problem.
Call the printer manufacturer to place a replacement request.
Experience: Expert in all major brands and models.
Our chat has ended, but you can still continue to ask me questions here until you are satisfied with your answer. Come back to this page to view our conversation and any other new information. What happens now? If you haven’t already done so, please rate your answer above. Or, you can reply to me using the box below.
please retype your reply again i see a blank message box.
I quit. I am out of business without a printer. It comes at a very
bad time for me. Guaranteed satisfaction for me now would be for someone to tell me how I to go about finding a business that would be able to give me a repair, along with an estimate - I'm sorry to
have bothered you. Yesterday my car battery went dead. Not my
time of the year I guess. Best Wishes -- XXXXX@XXXXXX.XXX
harware issues can only be fixed when the part is replaced.
we do provided guranteed satisfaction and resolution that will not fix hardware problems till the time its replaced after getting the fault identified.
you can call or order the print head online and you can replace it by your self.
Click on the link.
http://www.inkjetprinthead.com/canon-printhead-for-ip4500-mp610-mp810_1.htm