How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask The-PC-Guy Your Own Question

The-PC-Guy, Computer Manager
Category: Printers
Satisfied Customers: 1832
Experience:  20 years experience providing remote computer support
Type Your Printers Question Here...
The-PC-Guy is online now
A new question is answered every 9 seconds

How do I fine the pairing code on my HP all in one printer

Resolved Question:

How do I fine the pairing code on my HP all in one printer so i can pair with my new laptop so I can print
Submitted: 4 years ago.
Category: Printers
Expert:  The-PC-Guy replied 4 years ago.
My Name isXXXXX will be helping you today. If I provide good service, you may ask for The-PC-Guy in your question title for your future needs.

the default pairing code for bluetooth is usually




if you need more specifics I would need to know the exact printer model number.
Customer: replied 4 years ago.
HP Photosmart C7180 All in one series
Expert:  The-PC-Guy replied 4 years ago.
you can configure bluethooth from the webserver for the printer.

you access this by typing in the your web browser.

http://printers ip address

you can get the ip address from the printer control panel. One of the options will be status or information.

for bluethooth setup go to the network configuration page, and one of the options under there will be bluethooth.

you can enter what HP calls a passkey which is like a pin number, and use the same number on the bluetooth device, or change its mode to low security, then you wont need to use a passcode to print to it.

hope this helps
Customer: replied 4 years ago.
Thanks but i nee the pass key for my model printerHP Photosmart C7180 all in one,
Expert:  The-PC-Guy replied 4 years ago.
like, i said you just make your own up, on the printers web page, or your can try the default which for most bluetooth devices. is 0000 or 000000
The-PC-Guy and 4 other Printers Specialists are ready to help you
Customer: replied 4 years ago.
I have tried your sugestions, doesny hp have as passkey that will work universally?????
Expert:  The-PC-Guy replied 4 years ago.
i'm sorry you can't figure it out. I don't have that exact printer model. But the instructions I have given you have worked on all HP multifunctions that I have worked on.

Related Printers Questions