How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Sowrav D. Your Own Question

Sowrav D.
Sowrav D., Engineer
Category: Printers
Satisfied Customers: 3147
Experience:  Completed Course In Computer Hardware and Printer Repairing
Type Your Printers Question Here...
Sowrav D. is online now
A new question is answered every 9 seconds

My Dell Photo All-In-One Printer 926 has error message 1203

Resolved Question:

My Dell Photo All-In-One Printer 926 has error message 1203 and will not come back on after I have done all that it tells me to do to take care of "printer head short" problem. Whats wrong or what am I doing wrong to take care of the problem?
Submitted: 4 years ago.
Category: Printers
Expert:  Sowrav D. replied 4 years ago.
Welcome to Just Answer ,My name isXXXXX will try to help you..

Please follow the steps below to reset the printer and let me know the result.

Turn off the printer power.

Disconnect the printer power brick and wait for 10 seconds.

While holding down the Start and Cancel buttons, re-insert the printer power brick.

Hold the Start and Cancel buttons until the power LED begins blinking and the printer shuts itself off.

Turn on the printer power.

The printer will be in the initial setup mode and you will need to choose a language, country, and enter the date and.
Customer: replied 4 years ago.
My printer is still showing "error 1203" and to consult the User's Guide. What do I do now?
Expert:  Sowrav D. replied 4 years ago.
Please remove all the cartridges, then clean the contacts on the cartridges and the holder inside the printer with a cotton swab dampened in distilled water, until they are clean completely. After that wait for drying and check the issue, do not wait for than 30 secs.
Sowrav D. and 2 other Printers Specialists are ready to help you

Related Printers Questions