Canon printer iP4600 error message 6C10 printer wont print. plse help? .
Optional Information: Make: CANON Model: iP4600 Already Tried: I have tried turning printer off & unplugged from power point waited 4 10 minutes but still no luck this is getting urgent
Hello,Welcome to JustAnswer. My name is XXXXXX XXXXXXX and I will be assisting you with your problem today.Most likely this is a print head issue. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:(1) Open the printer and wait for the carriage to slide over(2) Remove the ink cartridges from the print head.(3) Use cotton swabs dipped in hot water to thoroughly clean the print head and each ink cartridge.(4) Repeat this until there is no ink residue coming off on the cotton swab.(5) Once finished, allow to dry and replace the cartridges(6) Try to print something nowIf that does not work then you have one of two possibilities:(1) One of the ink cartridges is defective and causing the error(2) If it's definitely not that, then the print head will need to be replaced.Thanks and please click the green ACCEPT button if you are satisfied with my answer.Thanks,Rob
I have tried all this inc. another print head still comes up with the same error msge.thanks anyway.
You tried another printhead? Are you sure you know what that is?
Based on your 'already tried' you have not.
The printhead is different than the ink cartridges
Experience: 5+ Years of Hardware Printer repair including installation and repair of Xerox MFP devices