How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Robert Preston Your Own Question

Robert Preston
Robert Preston, Technician
Category: Printers
Satisfied Customers: 9561
Experience:  5+ Years of Hardware Printer repair including installation and repair of Xerox MFP devices
14124282
Type Your Printers Question Here...
Robert Preston is online now
A new question is answered every 9 seconds

how do i change black ink cartridge in my epson stylus nx110

Customer Question

how do i change black ink cartridge in my epson stylus nx110 printer. i'm new to all of this and still learning
Submitted: 6 years ago.
Category: Printers
Expert:  Robert Preston replied 6 years ago.
Hello Sir or Madam,

Welcome to JustAnswer Printers & Office. I will be happy to help you with your problem today.
Remove and Install Cartridges
Be sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.
1.
Turn on the Epson Stylus NX110 Series.
If a cartridge is expended, the ink light on the control panel stays on. You must replace the cartridge to be able to print.
If the ink light is flashing, a cartridge is low on ink; replacement is recommended.
Note:
If the ink light on the control panel is flashing or off and you need to change a cartridge, run the Ink Cartridge Replacement utility instead of following the instructions below.
2.
Open the scanner and prop it up with its support.
Caution:
Do not touch the white cable inside the printer or you may damage it.
3.
Press the Stop button. The print head moves to the position to indicate which cartridge is low or expended.
4.
Press the Stop button again.
If another cartridge is low or expended, it moves to the position. Press the Stop button again to see if more cartridges are expended.
If no other cartridges are low or expended, the print head moves to the replacement position on the right.
5.
Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Dispose of it carefully. Do not take the used cartridge apart or try to refill it.
Caution:
Do not touch the white cable inside your printer.
Warning:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children and do not drink the ink.
6.
Before opening the new cartridge package, shake it four or five times. (Do not shake a cartridge after opening the package; ink may leak.)
7.
Remove the cartridge from the package, but be careful not to touch the green chip on the cartridge.
8.
Remove the yellow tape from the bottom of the cartridge.
Caution:
Do not remove any other labels or seals, or ink will leak.
9.
Insert the new cartridge into the holder and push it down until it clicks into place.
10.
Once you replace all the necessary cartridges, lift the scanner slightly, release its support, and lower the scanner.
11.
Press the Stop button to begin charging the ink. This takes about 1 1/2 minutes.
When the On light stops flashing and remains on, ink charging is finished.
Caution:
Never turn off the Epson Stylus NX110 Series while ink is charging or you’ll waste ink.

If the ink light flashes, press the Stop button and press down all the cartridges securely.

If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust, and place it in a plastic bag. Store the cartridge in the same environment as the Epson Stylus NX110 Series with the label facing upward. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area, and do not store the cartridge upside down.

If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Thanks,
Robert Preston
Customer: replied 6 years ago.
i only need to replace the black ink cartridge,how do ido this?
Expert:  Robert Preston replied 6 years ago.
Follow the instructions above.

Rob

Related Printers Questions