How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask eauto Your Own Question
eauto
eauto, the car guy
Category: Porsche
Satisfied Customers: 15076
Experience:  15 plus years of automotive experience
6149662
Type Your Porsche Question Here...
eauto is online now
A new question is answered every 9 seconds

Where is code p2089 locate at in front or in the back of the

Customer Question

where is code p2089 locate at in front or in the back of the engine?
Submitted: 11 months ago.
Category: Porsche
Expert:  eauto replied 11 months ago.

what do you mean

Customer: replied 11 months ago.
is the sensor in front or back of the motor?
Expert:  eauto replied 11 months ago.

well its generally not a sensor\

P2089

Inlet Camshaft Output Stage, Bank 1 - Above Limit/Open Circuit

Diagnosis conditions

  • Battery positive voltage between 10 V and 16 V
  • Time elapsed after engine start-up: 10 seconds

Possible fault cause

  • Short circuit to B+ in triggering wire
  • Open circuit in the triggering wire
  • Fuse F9 faulty (fuse carrier in E-box, radiator tank)
  • KE7 disconnection point disconnected
  • Magnetic hydraulic valve faulty (short circuit or open circuit)
  • DME control module faulty

Affected pin
DME control module connector B, pin 115, and magnetic hydraulic valve connector, pin 2

Diagnosis/troubleshooting

NOTE: If fault P2089 is identified, the camshaft remains in its initial position or returns to this position (no adjustment).

NOTE: The wiring for fuse F9 and magnetic hydraulic valve connector, pin 1, is routed via the KE7 disconnection point, pin 6.

Related Porsche Questions