How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wolfgang Your Own Question
Wolfgang
Wolfgang, ASE Certified Technician
Category: Porsche
Satisfied Customers: 4220
Experience:  Ase Master Tech L1 L2 advanced diagnosis certified 15 yr technician
19871424
Type Your Porsche Question Here...
Wolfgang is online now
A new question is answered every 9 seconds

Porsche Cayenne diesel: code P24B0

Customer Question

code P24B0
Submitted: 1 year ago.
Category: Porsche
Expert:  Wolfgang replied 1 year ago.
Hello were there any other codes and what scan tool was used? Was there any wording of the code?Please let me know
Customer: replied 1 year ago.
Waiting for answer. Chris
Customer: replied 1 year ago.
Maxiscan MS-309 code P24B0, X-431 PRO code p24B0, no other code, no coments Chris
Expert:  Wolfgang replied 1 year ago.
sorry for the delay on this . There have been an issue with the site where i could not respond. that code is for the particulate trap sensor. is there also a light on in the dash where shows an exhaust light?
Customer: replied 1 year ago.
There are no other lights on the dashboard. Only czeck engine. Chris
Expert:  Wolfgang replied 1 year ago.
ok then need to check the regeneration cycle to make sure that the soot level is less than 40 ml's. if over then the vehicle will need to go to the dealer note factory scan tool will be needed to expedite the dpf burn.
Customer: replied 1 year ago.
Is there a way to clean up pdf yourself ??? Chris
Expert:  Wolfgang replied 1 year ago.
no without the factory scan tool there is absolutely no way because if not done correctly the car can catch on fire!!
anything else?
if not.....
I try to be online 365 days a year.
I only earn a paycheck when a customer rates me Ok, Good, Excellent.
This rating is VERY IMPORTANT! Your rating compensates me on my time and my expertise on your issue!
A lot of the repair information and fixes are hard to come by!!
So please rate me above!!!!
If I have not addressed your original question to your liking yet, I hope you will reply and continue working with me, since your charged the full question value, regardless if you rate negative or not at all. If you rate me now, do not worry, you can still reply later to me.
Thanks
Wolfgang
Customer: replied 1 year ago.
I understand thanks for the help. Chris
Expert:  Wolfgang replied 1 year ago.
sure my pleasure!