How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Engineer - BEng Hons
Category: Porsche
Satisfied Customers: 20602
Experience:  Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing
12772297
Type Your Porsche Question Here...
Matt is online now
A new question is answered every 9 seconds

Porsche 911 4S: 2006 porsche 3.8 engine timing mark please

Customer Question

2006 porsche 3.8 engine timing mark please
Submitted: 1 year ago.
Category: Porsche
Expert:  Matt replied 1 year ago.
HelloThe crank pully uses a pin to put the crank in the proper location. It is a factory special tool but if you don't have it, you can use a long 8 mm bolt and cut the head off. Use the non threaded area of the bolt to slide it in the timing hole in the crank pulley which continues to slide through into the case when pulley is in the correct location. Here is an image of the pulley and TDC location:http://ww2.justanswer.com/uploads/PO/porscheguru/2013-02-17_181840_pulley.gif
Expert:  Matt replied 1 year ago.
Hi
do you still need help?