How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1675
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

I have an Intex 4 person bubble spa. I have had it almost 3

Customer Question

I have an Intex 4 person bubble spa. I have had it almost 3 years. The blow up spa itself is losing air. I have patched the two spots I found. I have sprayed the soapy water everywhere, top bottom sides inside and even held the spa up and sprayed the bottom. I am pretty sure there is no leak there. I re-aired it Saturday afternoon and at noon yesterday it was still firm, but upon sitting and bouncing to check it about 4 hours later it was low again. Sooo that draws me to the conclusion the air valve that I use to inflate the pool has a leak. I have sprayed around it but do not see bubbles. I lost the little cap with the spring squeeze sides and am thinking and hoping that might be the issue. I have searched parts but of course cannot find that tiny cover. Can you send me one? Could this be my solution? HELP
JA: Who manufactured the spa?
Customer: Intex
JA: Do you plan on doing the work yourself?
Customer: Probably
JA: Anything else we should know to help you best?
Customer: Just can you send me the cover for the air intake valve?
Submitted: 10 days ago.
Category: Pool and Spa
Expert:  James I replied 10 days ago.

Is this the inflation cap your referring to which is missing here?