How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, General Contractor
Category: Pool and Spa
Satisfied Customers: 19533
Experience:  Licensed construction supervisor with 35+ yrs. experience.
94766
Type Your Pool and Spa Question Here...
Rick is online now
A new question is answered every 9 seconds

I am not working with a pool but with a solar water heater.

Customer Question

I am not working with a pool but with a solar water heater. The technician I talked with told me I needed a GLX-PC-12-KIT sensor. When I went to Amazon they listed your pool sensor. I need a flat surface mounted sensor to mount on the pipe of the water storage unit.
JA: Who manufactured the pool?
Customer: Read my message. IT IS NOT A POOL!
JA: Do you plan on doing the work yourself?
Customer: YES
JA: Anything else we should know to help you best?
Customer: the resistance of the sensor should be 10 K ohms at 25 degrees C
Submitted: 9 days ago.
Category: Pool and Spa
Expert:  Rick replied 9 days ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation. So there's no misunderstanding you're on the JUst Answer site. We do not rep or sell any product.

Does it have to be flat (the pipe is round)? Flat sensors are not common.

Customer: replied 9 days ago.
The pipe is round 1/2 inch diameter
Customer: replied 9 days ago.
Too expensive for my need
Expert:  Rick replied 9 days ago.

Ok, let me see what I can find. What's too expensive?

Expert:  Rick replied 9 days ago.

Do you have more questions?

Related Pool and Spa Questions