How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

I just replaced the control board on a Utopia Tahitian, but

Customer Question

i just replaced the control board on a Utopia Tahitian, but getting the control unplugged blinking red light
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: the spa just stop working, and trip the breakers when i reset the brakers they keep tripping after 10 seconds then i figure the board was not right
JA: Who manufactured the spa?
Customer: because a couple of the components looked tostaded/overheated so i just replace the board but now when get the power on the green light LIM OK come on HTR ON remains off
JA: Do you plan on doing the work yourself?
Customer: but the CONTROL UNPLUGGED is blinking red
JA: Anything else we should know to help you best?
Customer: yes, i can do it my self
Submitted: 1 month ago.
Category: Pool and Spa
Customer: replied 1 month ago.
manufacture is Waltkinds / Caldera
Expert:  Billy replied 1 month ago.

My name is Billy. I see your question stumped the panel here.

I just logged on and saw you had not received an answer yet.

I am willing to help you if you still need assistance. Just let me know how the project is going and I can help you or close this question for you.

Once again I apologize for the delay.

Billy

Related Pool and Spa Questions