How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

My Zodiac Vortex 3 unit would not start. I inspected the

Customer Question

My Zodiac Vortex 3 unit would not start. I inspected the four (4) pin cable and noticed that one of the three (3) wires RED had come out of the insert plug. The small screw had come out and is missing. In trying to reattach it, the other two (2) wires, black and brown came out. Now I am not sure which wire goes in what hole. There are four (4) holes marked 1, 2, 3, and other. Can you tell me which color goes in which hole?
JA: Did you double-check the thermostat? And what about the unit's filters?
Customer: The water temperature is fine. The filters have been cleaned. The problem is a lose wire on the floating blue cable.
JA: Do you plan on doing the work yourself?
Customer: If it is a matter of a simple screw to tightened the connection yes. Otherwise I will have to take it to an authorized service center.
JA: Anything else you want the pool technician to know before I connect you?
Customer: please connect me.
Submitted: 2 months ago.
Category: Pool and Spa
Expert:  Billy replied 2 months ago.


My name is ***** ***** I am sorry for the delay.

What connection are you referring to (end) on the cable?

Related Pool and Spa Questions