How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22120
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Prologic System Hayward and two pumps for my pool,

Customer Question

I have a Prologic System Hayward and two pumps for my pool, One is for the jets (filter) and when switched to another valve on the controller part slide jets...so it opens a valve part way. Right now it is coming on each time the filters are on.......taking away from the circulation. Is there a way for me to set it back...so only the slide comes on when the correspond Valve Button is pressed on the controller?
It is not the actual pro logic that is the issue it is the valve setting on the back of the pump inside the square housing.
Thanks, Igor
Submitted: 4 months ago.
Category: Pool and Spa
Expert:  Billy replied 3 months ago.

I am very sorry your question has not been picked up yet.

I just logged on and found you had not been assisted.

Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet.

If you would like to proceed let me know by replying

Customer: replied 3 months ago.
Thanks for your reply, yes I still require assistance if possible.
Best, Igor

Related Pool and Spa Questions