How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Pool and Spa
Satisfied Customers: 15756
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Pool and Spa Question Here...
Pete is online now
A new question is answered every 9 seconds

On the Jandy control the screen is blank except for Firmware

Customer Question

On the Jandy control the screen is blank except for
Firmware RevB13
Nothing working
Submitted: 3 months ago.
Category: Pool and Spa
Expert:  Pete replied 3 months ago.

Hi Dan

Expert:  Pete replied 3 months ago.

If the power is interrupted, the controller will lock up and display the firmware version on it.

Try pressing the reset switch, normally located on the side of Jandy controllers, to reset the unit.

If that doesn't work, check all wiring and connections for any sign of damage, and ensure the connectors are securely attached.

Let me know how you get on...

--------------------
Kindly rate my service 5 stars at the top of your question page if my answer worked so I am rewarded for my time; tips appreciated :)
Otherwise please reply back if you need further assistance.
Pete.
--------------------

Expert:  Pete replied 3 months ago.

Hi, just checking in on your question, do you need any further assistance?

Related Pool and Spa Questions