How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

After installing a new control board on a sta rite 400NA How

Customer Question

After installing a new control board on a sta rite 400NA How do I reset the board to eliminate 128 and r13?
Thanks,
Steve
Submitted: 3 months ago.
Category: Pool and Spa
Expert:  garrygoeson replied 3 months ago.

Hi Steve:

My name is Garry. I'll be glad to assist you with your heater

Expert:  garrygoeson replied 3 months ago.

When you first power up the heater, you will see the "128 and R13". These are just revision numbers, and NOT fault codes. They are NOT resettable.

Expert:  garrygoeson replied 3 months ago.

Just checking back to see if you still need help with your heater?

Related Pool and Spa Questions