How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 21995
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Jandy AP1400 PureLink chlorine generator purchased

Customer Question

I have a Jandy AP1400 PureLink chlorine generator purchased in 2008. My question is: why am I getting a warning that the Salt Level Too High, and error code 145? I haven't added salt for at least a month, my ppm has been stable at 2900-3200 (just had it checked today local pool supply store). The general fault error continues. I did an acid wash of electrolytic cell today (it was very scaled) but it still has error reading as too high salt even after cleaning.
My water analysis today shows all OK except low chlorine, and low cyanuric acid (10).
Any insight??
Paul W.
Submitted: 2 months ago.
Category: Pool and Spa
Expert:  Billy replied 2 months ago.

I am very sorry your question has not been picked up yet.

I just logged on and found you had not been assisted.

Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet.

If you would like to proceed let me know by replying

Customer: replied 2 months ago.
No need to answer. I found the answer already.

Related Pool and Spa Questions