How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gaztech Your Own Question
Gaztech
Gaztech, HVAC Technician
Category: Pool and Spa
Satisfied Customers: 437
Experience:  Owner at Gaztech
92290868
Type Your Pool and Spa Question Here...
Gaztech is online now
A new question is answered every 9 seconds

I have a Hayward H series heater...lights are on but nobody

Customer Question

I have a Hayward H series heater...lights are on but nobody seems to be home. Display shows water temp. but that's it. Will not adjust heat, switch to spa, pool or standby and will not adjust temp. Heater will not turn on and no noises or any other indications. Flow is fine and have cycled power on and off several times. Filter is directly wired to box with a switch.
Submitted: 10 months ago.
Category: Pool and Spa
Expert:  Gaztech replied 10 months ago.

Hello, I amCustomer/p>

If your unit does not list a fault code and just temp it should let you do temperature changes, just to make sure there is a dip switch on the back of that control board, make sure it is set to off.

But most likely part will need replacing.

.part no. HAXCPA1930 Control Bezel Asy.