How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22347
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a jandy 1400 salt cell and I have a flow and flow

Customer Question

I have a jandy 1400 salt cell and I have a flow and flow reversing lights on.
JA: What's the make and model of your machine? And can you guesstimate how old it is?
Customer: aqua pure 1400 and I just replaced the cell about 3 months ago
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Pool Technician about your situation and then connect you two.
Submitted: 8 months ago.
Category: Pool and Spa
Customer: replied 8 months ago.
Also, the cell doesn't seem to be production chlorine. I measured the chlorine this morning and it was below 1.0. The salt reading is at 2500 and the temp of the pool is 85 degrees F.
Expert:  Billy replied 8 months ago.

I am very sorry your question has not been picked up yet.

I just logged on and found you had not been assisted.

Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet.

If you would like to proceed let me know by replying