How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tomen99 Your Own Question
tomen99
tomen99, Handyman
Category: Pool and Spa
Satisfied Customers: 111
Experience:  Certified pool operator and maintenance supervisor
63148040
Type Your Pool and Spa Question Here...
tomen99 is online now
A new question is answered every 9 seconds

I have a jandy lite 2 model j400n. Both Ignitor fuses blow

Customer Question

I have a j***** *****te 2 model j400n. Both Ignitor fuses blow as soon as the Ignitor lights. I checked the voltage
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: About 1 week now. The voltage between the and two
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: I checked the voltage between t1 and t2 and it's reading 241 volts which I believe is too high. I have a 115v system. Is it possible that the power control board is bad?
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Pool Technician about your situation and then connect you two.
Submitted: 9 months ago.
Category: Pool and Spa
Expert:  tomen99 replied 9 months ago.
Are you certain the meter is measure ac not dc?
Expert:  tomen99 replied 9 months ago.
It is likely the igniter is bad or touching something in the cabinet.

Related Pool and Spa Questions