How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

Burner s light wont stay lit. It will try to restart and

Customer Question

Burner s light wont stay lit. It will try to restart and flash 3times i installed igniter and flame sensor $222
Submitted: 4 months ago.
Category: Pool and Spa
Expert:  Rick replied 4 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. First I’ll need some more info so I have a more complete picture of you situation.

What is the brand and model number of your unit?

Customer: replied 4 months ago.
Jandy htr draft hood installed and a total disassembly clean out of fins fuzable link is ok
Expert:  Rick replied 4 months ago.

What model Jandy?

Customer: replied 4 months ago.
Expert:  Rick replied 4 months ago.

I need the model number on the rating tag

Customer: replied 4 months ago.
Customer: replied 4 months ago.
I don't get any message on control panel saying what is at fault
Expert:  Rick replied 4 months ago.

I'm going to open this up to my colleagues so one of them can help. Please don't respond (even to acknowledge this post)until you get a response from us. If you respond first it will only delay your answer.

Customer: replied 4 months ago.
It has been two days and no response from you. I will request a refund.

Related Pool and Spa Questions