How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

Booster pump question: purchased a new Hayward 6060 booster

Customer Question

booster pump question: purchased a new Hayward 6060 booster pump it is wired correctly, but when turned on it flips the breaker after about 12 seconds. Had to put new pvc piping to connect it but the guy put in 4 elbows. would the elbows cause to much additional pressure and cause this or do you think I have a bad pump. we have checked the breaker switch it is fine. ????
Submitted: 5 months ago.
Category: Pool and Spa
Expert:  Steve G. replied 5 months ago.

Hello there and welcome to Just Answer. My name is ***** ***** I will be assisting you today. I am an engineer with over 30 years of electrical repair and installation experience. I will try and answer your question accurately and precisely so that we can get you on your way.

What is the size in amps of the breaker and is it a GFI device?

Related Pool and Spa Questions