How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tomen99 Your Own Question
tomen99, Handyman
Category: Pool and Spa
Satisfied Customers: 111
Experience:  Certified pool operator and maintenance supervisor
Type Your Pool and Spa Question Here...
tomen99 is online now
A new question is answered every 9 seconds

I am trying to vaccum the pool with a suction type vac when

Customer Question

I am trying to vaccum the pool with a suction type vac when hose is connected to the skimmer pressure falls off and back up again we have blown the lines to insure not obstruction getting a good vertex at skimmer with nothing hooked up and good pressure at the sand filter around 14psi
Submitted: 5 months ago.
Category: Pool and Spa
Customer: replied 5 months ago.
I have also replaced all seals on wet side of pump and impeller and diffuser look good to.
Expert:  tomen99 replied 5 months ago.
Have you done this successfully before?

Related Pool and Spa Questions