How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tomen99 Your Own Question
tomen99
tomen99, Handyman
Category: Pool and Spa
Satisfied Customers: 111
Experience:  Certified pool operator and maintenance supervisor
63148040
Type Your Pool and Spa Question Here...
tomen99 is online now
A new question is answered every 9 seconds

My goldline board is not working how can i reset currently

Customer Question

my goldline board is not working how can i reset currently it shows Hi salt and not generating both salt level and ph are ok also chlorinator was checked
Submitted: 6 months ago.
Category: Pool and Spa
Expert:  tomen99 replied 6 months ago.
Turn system off wait 1 minute. Turn back to auto. There should be an audible click. Then press the diagnostic button 5 times. The system should auto calibrate. If it fails to calibrate and salt, pH, and temp are all within range you should consider changing the sensor.

Related Pool and Spa Questions