How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

Pearl, getting ilo code on my RaypakP-R206A JA: I'll do

Customer Question

hi pearl, getting ilo code on my RaypakP-R206A
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: igniter working perfectly, no gas to pilot.
JA: Is there anything else important you think the Pool Technician should know?
Customer: Checked voltage across PV/MV-PV terminals, 29VAC.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Pool Technician about your situation and then connect you two.
Submitted: 6 months ago.
Category: Pool and Spa
Customer: replied 6 months ago.
I also removed the pilot tube from the valve just in case the tube was clogged. I smelled for propane, there's none. the pilot valve is not opening.
Expert:  Rick replied 6 months ago.
Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.If you have 29 vac across PV & PV/MV and there's no gas at the pilot tubing tapping then your gas control valve is faulty and needs to be replaced.

Related Pool and Spa Questions