How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22245
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

My hot springs vanguard 2004 won't heat replaced the heater

Customer Question

My hot springs vanguard 2004 won't heat replaced the heater today power light green heater light solid red
Submitted: 8 months ago.
Category: Pool and Spa
Customer: replied 8 months ago.
Jets work great full power
Expert:  Billy replied 8 months ago.
I am very sorry your question has not been picked up yet.I just logged on and found you had not been assisted. Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet. If you would like to proceed let me know by replying. Once again use reply
Customer: replied 8 months ago.
Once again use reply
Expert:  Billy replied 8 months ago.
There is a flow/pressure switch that must make contact before the heater is allowed to run. It could be jammed or defective. Do you know how to bypass the switch for a test?

Related Pool and Spa Questions