How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, HVAC Supervisor
Category: Pool and Spa
Satisfied Customers: 19482
Experience:  40+ yrs. experience as a licensed oil & gas technician.
94766
Type Your Pool and Spa Question Here...
Rick is online now
A new question is answered every 9 seconds

Pool Heater P-M156A-EN-CHigh Limit 2 FailureWhere is

Customer Question

Pool Heater P-M156A-EN-C
High Limit 2 Failure
Where is this switch located
I replaced the one right behind the gas valve, still failing
Submitted: 7 months ago.
Category: Pool and Spa
Expert:  Rick replied 7 months ago.
Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.The limits are located on top of the inlet-outlet header. Here is a link to your manual. Refer to part blow up on page 35 for the header (2-H)and 36 for the limits (1-C)MANUALDescription of the limits is on page 27

Related Pool and Spa Questions